Page 1 of 1
Scripting Help for "3 Item Menu"
Posted: Wed Jan 07, 2015 11:52 pm
by David Ward
Hello. I'm looking for some scripting help. There is a very specific script that I am trying to create but it is proving to be more difficult than I had first considered. I would be willing to trade services using the editor for some assistance in this regard.
The intention of the script is as follows.
There are 3 altars. There is 1 item on each altar, a prize, for completing a dungeon. Off to the side is an exit teleporter with an iron gate. The gate is open. If the player takes 1 item, the gate remains open. If the player takes 2 or more items, the gate closes. If the player puts the items back, so that only 1 item has been removed from the altar, the gate opens.
I cannot for the life of me figure out how to make this work. Any help would be muchly appreciated. Am willing to trade time for editor work (dungeon/map making, etc.). Thank you.
Re: Scripting Help for "3 Item Menu"
Posted: Thu Jan 08, 2015 4:02 am
by David Ward
I've managed to figure this out, but the script code looks hilarious:
Code: Select all
function surfaceContains3(surface, item)
for v,i in surface:contents() do
if i.go.name == item then return true
end
end
end
function deactivatebridge1()
if surfaceContains3(altart11.surface, "long_sword") then
magicbridget11.controller:deactivate()
end
if surfaceContains3(altart22.surface, "frostbite_necklace") then
magicbridget11.controller:deactivate()
end
if surfaceContains3(altart33.surface, "full_helmet") then
magicbridget11.controller:deactivate()
end
if surfaceContains3(altart11.surface, "long_sword") and
surfaceContains3(altart22.surface, "frostbite_necklace") and
surfaceContains3(altart33.surface, "full_helmet") then
magicbridget11.controller:activate()
end
if surfaceContains3(altart11.surface, "long_sword") and
surfaceContains3(altart22.surface, "frostbite_necklace") then
magicbridget11.controller:activate()
end
if surfaceContains3(altart11.surface, "long_sword") and
surfaceContains3(altart33.surface, "full_helmet") then
magicbridget11.controller:activate()
end
if surfaceContains3(altart22.surface, "frostbite_necklace") and
surfaceContains3(altart33.surface, "full_helmet") then
magicbridget11.controller:activate()
end
end
Basically, If more than 1 of the 3 altar items is taken off their altars, the magic bridge leading to the exit deactivates. It reactivates until at least 2 items are on their altars (and the party has only then taken 1). I'm just glad it works.
Re: Scripting Help for "3 Item Menu"
Posted: Thu Jan 08, 2015 7:06 am
by Isaac
Here is an alternate method. This script doesn't care where the prizes are, only that at least two of them are on the alcoves.
[If placement is important, it will need to be modified.]
To try it: Add the script, and connect a set of three alcoves to it; their names must end in sequence [_1,_2,_3]. The name prefix used in the script is 'dungeon_alcove'. Change if needed; it should match the prefix of your alcoves. The script uses mine_door_spear_1 by default; change the name in the doorOpen function() to match your chosen door.
Connect each alcove to the script twice; once for insert, and once for removal. Change the string item IDs in the 'prizes' table to match your own.
Code: Select all
prizes = {"figure_skeleton", "figure_ice_guardian", "figure_ogre"}
function _itemCheck()
local tally = 0
for x = 1, 3 do
for _,item in findEntity("dungeon_alcove_"..x).surface:contents() do
if item ~= nil then
for i,prize in pairs(prizes) do
if item.go.name == prize then
tally = tally + 1
break
end
end
end
end
end
return tally >1
end
function doorOpen()
if _itemCheck() then
mine_door_spear_1.door:open()
else mine_door_spear_1.door:close()
end
end
Re: Scripting Help for "3 Item Menu"
Posted: Thu Jan 08, 2015 9:44 am
by David Ward
Okay see, that's awesome. Thank you very much for the reply. I do not at all know the depth of what you have put together there in the code, but I will give it a shot and report back.
Re: Scripting Help for "3 Item Menu"
Posted: Thu Jan 08, 2015 7:57 pm
by David Ward
Followed your directions --> works perfectly. Thank you very kindly for writing that code and posting a reply to my inquiry. You are a gentleman and a scholar.
Re: Scripting Help for "3 Item Menu"
Posted: Thu Apr 23, 2015 10:37 pm
by David Ward
Hi Isaac. I know it's been awhile. I was wondering if there was a way to modify this "choose your 1 prize out of 3" system to make it, say, "2 out of 4". Is there a way to do that? To have 4 alcoves with 1 prize in each, and if more than 2 are taken, then the door shuts until there are at least 2 items still on the alcoves.
Re: Scripting Help for "3 Item Menu"
Posted: Thu Apr 23, 2015 11:33 pm
by Isaac
Set the number of alcoves, and the number of gifts; in this case, 4 and 2.
*Remember the naming scheme for the alcoves.
Code: Select all
prizes = {"figure_skeleton", "figure_ice_guardian", "figure_ogre", "figure_crowern"}
alcoves = 4
gifts = 2
function _itemCheck()
local tally = 0
for x = 1, alcoves do
for _,item in findEntity("dungeon_alcove_"..x).surface:contents() do
if item ~= nil then
for i,prize in pairs(prizes) do
if item.go.name == prize then
tally = tally + 1
break
end
end
end
end
end
return tally >= alcoves - gifts
end
function doorOpen()
if _itemCheck() then
mine_door_spear_1.door:open()
else mine_door_spear_1.door:close()
end
end
Re: Scripting Help for "3 Item Menu"
Posted: Thu Apr 23, 2015 11:53 pm
by David Ward
Well then....that is service, sir. I did not expect such a quick response. The code works perfectly. You've thoroughly earned a mention in our game credits. Much obliged.